CupriSorb™ is a powerful adsorbent of copper and heavy metals. CupriSorb™ will remove copper more rapidly and efficiently than carbon and is thus ideal for emergency copper removal. It extracts all types of copper, including chelated copper, and remains effective until it turns a deep blue-black color. It may be regenerated repeatedly. If placed in continuous use, it will gradually extract even precipitated copper from the gravel/substrate bed as well.
CupriSorb™ will allow maintenance of invertebrates in copper-treated tanks by removing copper leaching from substrates.
CupriSorb™ is a powerful copper specific chelating resin. Competing products are not chelating products, but merely cation exchange resins. Such resins can remove copper from freshwater but are ineffective in saltwater.
Sizes: 100 mL, 250 mL, 500 mL, 4 L
Directions
Use 250 mL for every 600 L (150 US gallons) to remove up to 7,500 mg (12 ppm) of copper. Use in filter media bag such as The Bag™. For best results, CupriSorb™ should be placed so as to maximize the flow of water through it. To remove undetectable substrate leaching copper keep CupriSorb™ in use for at least 2 weeks after copper tests report no copper. Use in a canister filter, chemical filtration module, box filter, or any high flow area of a trickle filter.
Exhaustion is indicated by a pronounced discoloration of the beads to a deep blue black color. Use MultiTest™ Copper to monitor copper. When exhausted, CupriSorb™ may be discarded or regenerated.
REGENERATION: Soak in a non-metal container with 2 cups of water and 1⁄2 cup of muriatic acid (available with pool supplies: PAY HEED TO WARNINGS on acid container!). This is best done outside and away from children. Soak for 1 hour, rinse well. Repeat as required to restore the original color. Rinse well, add sodium bicarbonate until foaming stops, and rinse again. CupriSorb™ is now ready for reuse. If original color cannot be restored after several acid washes, proceed with rinses and bicarbonate step, then regenerate as HyperSorb™ or Purigen®.
FAQ
How do I know when CurpiSorb™ is exhausted, and how do I regenerate CupriSorb™
A: Exhaustion is indicated by a pronounced discoloration of the beads to a deep blue black color. When exhausted, CupriSorb™ may be discarded or regenerated. Regenerate by soaking bag or beads in a non-metal container with 2 cups of water and 1/2 cup of muriatic acid (available with pool supplies: PAY HEED TO WARNINGS on acid container!). This is better done outside and away from children. Soak for an hour, rinse well. Repeat as required to restore the original color. Rinse well, add backing soda (sodium bicarbonate) until foaming stops, and rinse again. CupriSorb™ is now ready for reuse. If original color cannot be restored after several acid washes, proceed with rinses and bicarbonate, then regenerate as HyperSorb™ or Purigen®. Use MultiTest: Copper to monitor copper.
Will CupriSorb™ leach copper back into the water when exhausted?
A: No. The copper is not released until you regenerate it.
I have a wet/dry filter. Where is the best place to put CupriSorb™ for my setup?
A: Most wet/dry filters have a drip plate on top of the biological media where the water enters the filter. That drip plate would be an ideal spot or anywhere that water will pass through the CupriSorb™
How effective is your CupriSorb™ at also removing iron and cadmium and led from water?
A: It can also remove cadmium and iron. It may also remove lead, but we do not have any data on lead removal so we cannot guarantee it.
Will CupriSorb™ effectively remove metals other than copper? I’m looking for a medium (preferably renewable) that will remove or at least significantly reduce all metals in my tap water.
A: It will also remove nickel, zinc, cobalt, cadmium, manganese. it may remove other heavy metals but we have no data for any others.
I am afraid of heavy metals building up in my tank. Can I leave CupriSorb™ in my filter permanently?
A: It is fine to leave CupriSorb™ in your filter for an extended period of time if you are afraid that there is some source of heavy metals leaching into your water. However, many heavy metals are actually essential to the health of fish, corals, and invertebrates in trace amounts. Leaving CupriSorb™ in your filter may eventually deplete these essential trace elements completely, so we do not recommend CupriSorb™ as a permanent addition to your filter.
| Size | 100ml, 250ml, 500ml |
|---|
Professionally packed and fast shipping
We can offer a variety of shipping options due to our long-term partnership with UPS FedEx DHL. Our warehouse staff are trained to package your goods exactly as per the specifications we provide. Prior to shipping your items will be thoroughly inspected and secured. Every day, we deliver to thousands of customers in many countries. Our commitment to become the biggest online retailer worldwide is demonstrated by this. There are distribution centers as well as warehouses across Europe as well as the USA.
Note: Orders containing more than one item will be assigned a distinct processing time based on the individual item.
Before shipment, all ordered items will be thoroughly examined. Today, the majority orders will be delivered within 48 hours. Expected delivery times are between 3-7 days.
Returns
Due to the multiple parties involved, including the factory and the warehouse, we're unable to fully manage stock. The actual stock levels can fluctuate at any point. Please be aware it's possible your order will be unable to fill after you place the order.
Our policy lasts for a period of 30 days. If you don't receive the product within the 30 days period, we are not able to issue the option of a refund or exchange.
You can only return an item when it's unopened and still in the same state as when you received it. You must have the item in the original packaging.
Related products
